The spraying production line manufacturers are environmentally friendly, and the power plug standard parts are effective because the dust concentration value of dry sandblasting treatment is less than/above, and reaches/above when it is more serious. Choosing wet test sandblasting treatment can reduce the smoke and dust concentration value of the work area /Following; Industrial dust removal can also be used, which is a common reasonable countermeasure. What impurities are stored in the powder coating room? How should everyone deal with them?

(1) Impurities in the curing furnace. The solution is to use a wet rag and vacuum cleaner to completely clean the inner cavity of the curing furnace. The key is the gap between the suspension chain and the ventilation duct. If it is gray-black large particle impurities, check whether the exhaust pipe filter is damaged, and if there is any damage, replace it immediately. (2) Impurities in the powder spraying room. Mainly floating dust, clothing chemical fiber, machine equipment frosted particles and powder spraying management system scaling. The solution is to apply air compression to purge the powder spraying management system before starting work every day, and use a wet rag and vacuum cleaner to completely clean the powder spraying equipment and powder spraying room.

(2) Product artifacts: too thick coating-manipulate the thickness of the coating, the water content of the product workpiece-solve the preparatory work before doing a good job, the working voltage is too high-adjust the working voltage, the gun distance is too close-to maintain the distance, Moisture of powder-dismantle and replace dry powder.

Powder impurity at the price of spraying production line. The main causes are too much powder preservatives, uneven dispersion of the color paste, and powder spots caused by the powder being extruded. The solution is to improve powder quality and improve powder storage and transportation methods.

(4) Solve the impurities before. It is mainly caused by large particles of impurities caused by the phosphate treatment slag and a piece of small impurities caused by the yellow rust of the phosphate treatment film. The solution is to immediately remove the slag in the phosphate treatment tank and the self-spraying pipeline, and control the concentration value and market share of the phosphate treatment tank. Suitable. , The quality of powder architectural coatings is not good, and there are too many fillers-high-quality powder architectural coatings are used for water impurities. It is mainly to solve the impurities caused by excessive sand content and excessive salinity in the applied water. The solution is to upgrade the filter and use pure water as the final clean water. The machinery and equipment of the powder spraying room will encounter many problems when carrying out the painting work. During the period, the raised particles on the surface of the powder architectural coating coating are the particulate matter. The powder architectural coating spraying manufacturers and manufacturers are a thorny problem. Particulate matter can be said to be a damage to the decorative art of the surface coating, and it will endanger the level of the painted product.