1. Purpose

The heavy-duty frame chain slag remover can be used for the slag removal of coal-fired steam and hot water boilers used in production and domestic heating. It can be matched with 1-75t/h boiler. It is suitable for multiple boilers connected in series and used for slag removal, with good water sealing performance. Reduce the labor intensity of slag removal to the limit, improve the working conditions of the boiler room, keep the boiler room clean, ensure the normal operation of the boiler, and ensure the needs of production and life. This machine belongs to an open water seal slag remover. It can still be used for conveying granular and powdery industrial materials with a diameter of less than 80 mm. Screw cleaner

2. Type

Viewed from the direction of the head of the slag remover, when the transmission device is on the right side, it is right transmission, and when it is on the left side, it is left transmission. The deceleration device uses planetary cycloid reducer. This machine is divided into an upper slag remover (push type), a lower slag remover, the upper slag remover is an iron machine slot, and the lower slag remover is divided into an iron machine slot and a cement machine slot.

Screw cleaner

Three, structural characteristics

The frame chain slag remover is a continuous working slag conveying equipment, which is composed of a driving device, a dragging device, a slag tank, a chain, an idler, and a tail tensioning device. The driving device is composed of a motor, a reducer, a driving sprocket and a frame. The power is transmitted to the reducer by the motor V-belt, and through the coupling, the driving sprocket rotates and the chain is driven. The chain is made up of chain links connected by shaft pins. The chain links are made of three different materials: cast iron, ductile iron and cast steel. The chain slides in the slag conveying trough paved with basalt cast stone lining to take the slag away, so it has It has the characteristics of clean slag removal, wear resistance and long use time. Because there are two safety pins on the coupling, it is not easy to damage important parts and burn the motor when the slag machine is overloaded or abnormal.