1. The coating line refers to the production line that undergoes the following series of operations
2. The specific operation process is as follows:
1. Put into the product: put the coated object on the plug-in and start working
2. Electrostatic dust removal: remove the oil and dust brought by injection molding
3. Preheating: for better coloring, give the object a little temperature
4. Primer spraying: cover the color of the plastic itself, and spray the base color first for the color required for production
5. Drying: through the temperature of the IR zone in the tunnel, in a semi-dry state to prepare for the next spraying
6. Surface spraying: spray the required color
7. Smoothing and drying: smoothing and drying through a tunnel. 8. UV spray curing: collocation with UV coating and using the amount of illumination required by the coating in UV365nm light (800~1200mj) for instant curing
9. Ship and check the packaging
contact us
Service hotline
13962651551 / 15962653322
Address: No. 12, Taihu South Road, Kunshan Economic and Technological Development Zone, Jiangsu Province
URL:www.sjcgy.com
Official WeChat
Into shengjichuan+
Product Center+
Case presentation+
News and information+