The operation of automatic painting equipment manufacturers requires a specific environment, including not only the hard environment of the spray line workplace, but also the soft environment of the painter. Automatic coating equipment has the following requirements for the workplace:

(1) The process of using toxic, irritating, and flammable substances should be placed in a separate workshop, or arranged in a separate workshop, equipped with personal protective equipment and fire-fighting equipment.

(2) Workshop corridors should be equipped with automatic fire doors, fire baffles, water curtains and other facilities to eliminate air across halls and prevent the spread of fire.

Manufacturer of automatic coating equipment

(3) Where it is necessary to safely reach the post above the equipment, an overpass with protective railings and stairs should be provided. Non-slip ground should be laid on the factory floor and overpass passages.

(4) There shall be no piled equipment, articles and wires on the pedestrian passage, and the passage width shall not be less than 1 meter.

(5) A protective net must be installed under the pipeline in the work area to prevent items from falling.

(6) Excess paint and waste paint should be separated and stacked in a special paint warehouse.